Getting Started

Read the material book and build a first scrap line that fills a real quota.

Read the quota before touching the scrap

The first useful choice is the form your next delivery needs. Open the research panel and write down the requested item and the progress counter. Find a scrap outlet you can inspect before it joins your main belt. Look at what the outlet is actually producing over several piles. A source that contains one example is enough for a first test. Watch longer before relying on it as the only supply for a continuous line.

Separate the material name from its current shape or state. A pile can contain the right material and arrive as an unusable form for the task you chose. Write down both the form in the quota and the form in the sample. If you can see the relevant property in the material book, use it to choose the first change to test. If you need to use whole scrap later, branch before any grinder or crusher.

Choose a property and set a visible finish line

Pick a separation whose outcome you can see at the exit. In the developer's examples, iron enters magnetic separation after grinding to dust, while rubber can be melted and drained. A player trying to recover two materials with different melting points needs a first stage where only one of them is liquid. Decide what you expect on both outputs before adding a second heat stage. That lets you distinguish a useful split from a machine that is simply passing the input through.

Build a short run around one sample. Leave enough belt after each exit to inspect the pile. Compare the two results at the first cut. Record the temperature at the entrance to a heated separator and the current material tags where the next machine picks up the output. A proper stage change is visible on the pile. A change on the machine display by itself can leave the outcome unresolved.

Build out from a delivery that actually counts

Once the short trial gives the right output, send one pile toward the intake for the intended quota. Verify that the item arrives and that the counter moves. An intact concrete item that works for drill research can still be the wrong form for a later monument request. Test the form called for by the panel you are using.

Next connect a second small supply. Keep sample access after the cut and retain an outlet for the scrap you have yet to sort. If an incoming pile is suddenly different, you can see the change without pulling apart the whole line. When space becomes tight, inspect the route to the research intake before placing another producer. A master research belt working with one input is easier to test than several busy branches arriving at once.

When the first line fails

If your intended item was missing from the outlet, revisit the source and inspect more scrap. If it arrived intact but never changed state, check machine placement and the property needed for its operation. If the right item left the machine yet research stayed still, inspect the shape and state at delivery and compare them with the request text. Those three distinct failures point to the source, the transformation or the intake, respectively. Test from the last place where the sample still matched your expectation.