How to keep uncrushed material for quotas

In STEEL GULLET, split before crushing. Send only the fraction committed to a powder-based step through the crusher. A player who crushed everything on the first line reported having to rebuild when a later quota required material in its original form.

Full Steam release unless a source specifies the demo. Evidence checked . Guide updated .

Steps

  1. Read the target research form and inspect the first pile that still matches it. Find where the current line destroys that form.
  2. Branch before that machine. Run an intact pile on the bypass and a separate pile through the crusher. Check that each reaches a distinct outlet where it can be identified.
  3. Use the powdered stream where the machine needs it, such as the iron magnet test. Keep the whole-material exit connected to whichever delivery or storage path you are using for the quota.

How to tell it worked

You can send uncrushed material to a quota without shutting down a separate powder process.

If you are still stuck

If the stockpile is already powder, the cited player could not restore the original form. Supply the quota from a new intact stream and check any construction recipes separately.

Find the last point where the item still matches the quota

Read the exact requirement from the current research panel and inspect one uncrushed sample upstream. Follow the line until the item's form changes. Make the bypass before the device that changes it. Keeping an inspection point on the uncrushed side lets you confirm what the branch contains before you extend it. Use the crushed line for a task you know needs powder, such as the prepared iron in the developer’s magnetic separation example.

When an output serves more than one job, trace the pipe or belt from the point of change to each destination. A bypass placed after the grinder still receives ground material. A bypass that rejoins upstream of a shared grinder can have the same problem farther along. Follow one uncrushed sample to the actual intake and watch it arrive in the original form.

Test whole and powdered outputs separately

Add one sample to the route for uncrushed material and look at the receiving end. If you are testing a quota, record the counter before and after that known sample. Then run a different test down the powdered route and observe the operation that needs it. Keeping those two trials separate is particularly useful while another branch sends similar material. The goal is two lines whose results you can identify at the end.

If the whole-material test works and normal operation still sends powder, look for the first merge after your bypass. Test the old and new routes separately at that junction. When the output changes only after reconnecting, correct the route that added the powder before rebuilding the grinder you still need. If uncrushed material reaches the input but a quota stays still, compare its exact form with the request. The monument and drill examples show why items made from the same concrete can be treated differently.

Handle the already-ground batch with a separate decision

One cited player reports they could not return their powder to its original form. Keep the existing powder available for any use you can actually verify and get another source of uncrushed material for a whole-item requirement. Preserve the new branch until both jobs pass their own test. A future processing route is easier to add if you leave an accessible point before the irreversible change.

Related tasks

Sources