Where to check material properties

In STEEL GULLET, open the book at the upper right to check a material’s melting and softening values. For a machine problem, compare the book with the property tags and temperature on the actual pile at the machine entrance.

Full Steam release unless a source specifies the demo. Evidence checked . Guide updated .

Steps

  1. Start with the output you need and write down its material and required form. A plate, a liquid branch and a powdered magnetic input each call for different conditions.
  2. Read the properties for both the material you want and anything leaving the same scrap stream. If you want to drain one while retaining another, their relative requirements matter more than either value on its own.
  3. Inspect one pile before and after the critical machine. Use the book to predict a visible result, such as a new Liquid or Ductile tag. Keep the test output on a separate belt while checking it.

How to tell it worked

You can pick the next machine from the current and desired states and tell whether the pile reached the expected state.

If you are still stuck

If your screen does not match a guide’s temperature, keep the value from the current in-game entry and recheck the input. Examples in player threads are for their own stream and build.

Work backward from what the next operation asks for

Read the precise form at the target machine or the quota before opening the book. A component expected to stay solid through a separator needs a different temperature than one meant to melt and drain. Material properties are useful once you have named the intended result. If the same pile carries two materials, open both entries and compare the relevant properties. Read the actual pile temperature before planning how much heat to add.

Write down the property you intend to change and the one you need to keep. For a forming operation, the useful interval lies between softening and melting. For a split that aims to leave material solid, check the position of both melting points. If two materials both meet the same entry condition after heating, the first test should establish whether a bath, a prior split or a different temperature can reduce the mix before the machine.

Read the property at three useful points

Inspect a test pile at its source, at the start of the machine and at the result. A change in the visible properties at the output tells you whether your intended state change occurred. The reading at the source gives useful context about why a saved layout might behave differently when attached to a warmer room. Inspecting both exits of a separator gives you the additional evidence that the new state produced the desired split.

If the item name and visible state seem to disagree, record both properties and the shape before changing the line. Players report that a cooled material may still be puddle-shaped. The Ductile tag makes the forming decision clearer than the shape label. In the PCB discussion, a state combining Conductive and Ductile had different consequences from wire that was only Conductive. A useful material lookup records the current tag for a particular recipe as well as the book value.

Save the evidence that matters when the example differs

When a guide’s numerical example differs from your material book or current input, preserve the date or build and the observed properties and values. A correct temperature from another player's pile may be too hot or too cool in your line. The calculation can still show how to find a workable threshold using your values. Keep one successful and one failed sample as a comparison before expanding the adjustment to the rest of the factory.

Related tasks

Sources