Where to get concrete blocks for drill research
In STEEL GULLET, recover intact concrete from scrap for the drill research. A player reported manually pulling blocks from the first debris output when the salt bath was still locked. Another reported a later output containing concrete, aluminium, copper and plastic.
Full Steam release unless a source specifies the demo. Evidence checked . Guide updated .
Steps
- Read the research panel and note the requested material form and remaining mass. If it asks for blocks, set aside a route before any crusher and check nearby unlocked scrap sources for intact pieces.
- If you only need a small remaining amount, compare manually collecting pieces with building a new factory line. The discussion has a successful manual route from the early debris output.
- If you want a repeatable supply from the aluminium, copper, concrete and plastic output, test melt-and-drain for the lower-melting material first. Verify thresholds in your book and watch that the retained concrete stays intact. Use the bath only if you have actually unlocked it.
How to tell it worked
The research requirement advances when you feed it the intact blocks. Check one submission before routing the entire output.
If you are still stuck
If you are working on The Eternity of the Party, use the separate monument guide. Community reports distinguish manufactured Concrete (Block) for that research from the scrap blocks used earlier.
Decide whether manual collection covers the remaining quota
Read the name and the remaining amount in the drill research panel. Inspect the first debris outlet before its material reaches any crusher. One player reported collecting intact concrete manually at this stage because the salt bath was unavailable. They described a requirement of 800 kg in their run. Check your own panel for the amount it requests. A few usable samples may be enough to finish a partly filled target without building an entire line.
Try a sample before collecting the rest. Read its item form and watch the research counter after delivery. If the value moves, compare the amount you still need with the concrete coming out of that route. Reserve the source if you expect to use it again. If the value stays still, confirm the selected research and shape before supplying a larger quantity.
Test a repeatable concrete branch when the manual route is slow
Check the composition of any accessible scrap outlet you plan to use. Players describe a stream containing aluminium, copper, concrete and plastic. Inspect the actual stream in your room before assuming the reported layout applies. The melt-and-drain approach relies on keeping concrete solid while removing materials that melt earlier. Read the book for that exact mix and test a small sample before adding several heaters to the route.
Follow the solid concrete through the new test to the delivery point. If you see intact material at the separator and powder at the research entrance, check the machines between those two points. A bypass around an existing crusher may be all you need. Consider a salt bath only if the machine is available in your build. A player in the thread had to use another route specifically because they had yet to unlock it.
If intact concrete still gives zero
Check the exact research title and form again. In the same discussion, players distinguish the scrap block used for the drill from the compacted block required for the later monument. An unused supply of intake-ready drill material can still fail that other request. Keep the two outputs identifiable if you are handling both jobs. The benchmark is the right counter moving after one observed delivery.