Can you remove barrels under stacked machines?

In STEEL GULLET, keep the support in place. A full-release player reported that removing a barrel also removed the supported machine. The player advising the barrel trick said their earlier experience might have been from the demo.

Full Steam release unless a source specifies the demo. Evidence checked . Guide updated .

Steps

  1. Before rearranging a working factory, separate the movement goal from the machine goal. If you only need to cross a busy floor, route the conveyor with elevators rather than placing another machine on a removable support.
  2. If you want to test supported placement, do it on an isolated cheap build. Verify that both the support and the machine are selectable and that the preview on your current build allows the arrangement.
  3. Keep the supported machine in place until you have an alternative line. Treat removal tests as destructive to the sample and make no assumption that your main separator will stay suspended.

How to tell it worked

Your permanent route works with its real support intact, or avoids the support entirely by moving the conveyor.

If you are still stuck

If a demo video removes the barrels successfully, check the date and build before acting. Full-release observations in the cited thread describe a different result.

Separate the routing problem from the unsupported placement test

Identify why you want the machine higher. If a conveyor needs to cross a busy line, test a belt above it with elevators instead of moving the whole machine. Verify one pile reaches the higher layer and can return to where it needs to go. This tests the route independently from any question about removing a support. Keep the existing machine where it works until you have checked the alternative end to end.

If the machine itself has to sit above another object, make a small test area that carries no live production. Place the proposed support and watch how the build preview handles the new machine above it. Check that you can see and select both objects. The question is whether the arrangement works with the support present and what happens if you remove the support. Those are separate observations to record.

Interpret the full-release report and older footage

The full-release player who tried the barrel arrangement reported that removing the barrel also removed the machine it supported. An earlier player suggested deleting a support under a machine and later noted that the old experience might have come from the demo. Preserve the observed version when comparing tutorials. The full-build result is sufficient reason to keep the support on a working line while you evaluate a deliberately disposable test.

If you do test removal, clear the area of items and machines you still depend on. Make sure you can replace the equipment you intentionally put in the test. Observe both levels immediately after removing the support. If both objects disappear, recreate the arrangement with the support remaining or move the belt using elevators. If your current build behaves differently, record the actual version, object pairing and observed result before relying on it elsewhere.

Retest the output you needed after changing the layout

Keep the permanent machine on a real supported placement. Check its inlet and outlet with a sample after routing around a busy floor. If the new conveyor reaches the higher level but product disappears farther along, trace each elevator connection before changing the machine's placement again. Verify that the finished route meets the transport or processing need that prompted the change.

Related tasks

Sources