Material Sorting

Find the right scrap source, separate solid and liquid materials, and deal with mixed outputs.

Decide what you need the sorting line to recover

Start by naming the desired material and the material you want to leave behind. Watch several piles from the same outlet, especially if their temperatures differ. If the books show different melting points, arrange a first cut where the lower melting material can drain while the other continues as a solid. If several materials melt in the same window, inspect their other properties and which machines are currently unlocked. The sorting guide is most useful when you can name a condition to test and a visible output for both exits.

Pick a guide by where the mix appears

Use the rubber and plastic walkthrough for a new sorting line with both materials present in incoming solid piles. Its worked example starts at 120 °C and aims between the two reported melting points at the first cut. Read the values in your own book before applying that player example. After the first cut, confirm that plastic remained on the through stream before adding enough heat to drain it downstream.

Use the mixed-liquid recovery guide when your original sorting line already left you with a contaminated output. Follow one new sample as far as the first merge or separation where you can see the two materials together. A first cut that receives both materials as liquids calls for a different test from two clean exits that meet later. Establish that difference before changing two settings at once.

Use the bones guide for a different sorting problem. The player report uses the second unlockable bath to lift bones and rubber together. The heat stage acts afterward, on that smaller branch. Inspect the bath exit to verify that the pair arrived before diagnosing the rubber drain. An unavailable bath is an unlock dependency, so keep the material on a branch you can revisit once the machine is available.

Check the source before you design the split

When you are missing wood or another kind of scrap, a player reported that debris by doors gives a clue to their outputs. Use that clue to choose which room to inspect. Confirm that actual output piles include the material and see what else is in those piles. Then decide what the adjacent sorting line has to handle. A room can be the right source even though the mix still requires a different test from one you built for another room.

Retest after you reconnect

Keep a sorting inspection point for each product until you have tested the reconnected line. Watch one new pile reach the next machine. Older material waiting in a branch or an unnoticed merge can make the last stage appear to behave differently from your short test. The first place that the output looks wrong is your best starting point on the next check. Test warm and cold input separately before committing a much larger flow to the same setting.