How to make Rubber Dust

In STEEL GULLET, the reported route is to unlock the Freezer through Temperature II, give rubber the Brittle property, then crush it. Cooling to 0 °C alone left rubber Flexible in the launch-week player report.

Full Steam release unless a source specifies the demo. Evidence checked .

Read Brittle before you send rubber to the crusher

If your research panel specifically asks for Rubber (Dust), keep one spare pile to test. In the launch-week Steam discussion, the player trying to fill that requirement cooled rubber to 0 °C and still saw Flexible. Their crusher could not make dust from that material. The temperature readout and the property that lets the crusher work are separate checks.

A reply offers a late-game route: research Temperature II to get the Freezer and use it to give the rubber Brittle. The reply places that unlock around the stage where the game asks for broken encased controllers. Check your own research screen for the actual unlock before planning a line around it. The thread leaves the earlier route unresolved.

Pick your next action from the material you actually have
What you seeWhat to do next
Cold rubber with FlexibleRecheck the property at the crusher. The reported 0 °C attempt kept Flexible.
Freezer availableProcess a rubber sample, then check for Brittle on the outgoing material.
Freezer still lockedKeep a spare feed for later. A reliable earlier route is still unconfirmed.
Rubber (Dust) already producedIsolate one sample and check the exact requirement at the research intake.

Commission the crusher with one marked path

  1. Start with separated rubber. Inspect the pile before the Freezer, especially if it came from a line that also handles plastic. If you need to clean up the feed, use the rubber and plastic separation guide first.
  2. Inspect both sides of the cooling step. Look at the same material immediately after the Freezer and again just before it enters the crusher. If the two readings differ, follow the belt from the Freezer to the crusher and find the first change. Check for a bypass or another feed joining that belt before changing the crusher.
  3. Read the output form. Keep the test outlet away from the usual dust belt so you can see which material the crusher produced. Compare its displayed name with the research entry. If you hand a mixed stream to research first, you lose the easiest way to see whether the crusher made the correct item.

The trial is complete when the crusher delivers Rubber (Dust) and one sample advances the requirement that asked for it. Then try the same path with a second batch from your regular source.

Two tempting shortcuts from the same discussion

One reply initially suggested melting rubber before crushing it, then withdrew that suggestion after a retest. A later reply reported a different result for plastic. Treat those as separate materials. If your goal is a rubber plate, use the forming route and keep that output separate from the dust experiment.

If the crusher produces the right dust and research still stalls, inspect the named requirement and the route into the intake. You have already verified the material preparation at that point. Test the isolated item at the intake before moving the Freezer or rebuilding the line. The research belt guide shows how to keep that intake test separate from a shared conveyor.

Related tasks

Sources